nginx转发内网Docker rocketmq sendDefaultImpl call timeout
问题描述
主要原因是内网的rocketmq无法和客户端通信导致的,公司外网服务器只允许开放的端口号12000-13000,而rocketmq默认端口号10911不在范围内,需要改为12xxx-13000,并且nginx的转发的端口也要保持一致,既nginx到docker 12021(nginx) -> 12021(主机) -> 12021(docker),还有rocketmq的fastRemoting模式端口是listenPort - 2 也必须转发出去
操作步骤
本文docker部署脚本使用foxiswho / docker-rocketmq
- 修改/rmq/rmq/brokerconf/broker.conf, brokerIP1改为外网地址, listenPort改为12021
- 修改docker-comopse.yml,broker端口映射 12019:12019 12021:12021
- docker-compose down, 从新运行start.sh
- ngin修改转发stream端口 12021 -> 12021 12019 -> 12019
参考脚本
docker-copose.yml
version: '3.5'
services:
rmqnamesrv:
image: foxiswho/rocketmq:4.8.0
# image: registry.cn-hangzhou.aliyuncs.com/foxiswho/rocketmq:4.7.0
container_name: rmqnamesrv
ports:
- 9876:9876
volumes:
- ./rmqs/logs:/home/rocketmq/logs
- ./rmqs/store:/home/rocketmq/store
environment:
JAVA_OPT_EXT: "-Duser.home=/home/rocketmq -Xms512M -Xmx512M -Xmn128m"
command: ["sh","mqnamesrv"]
networks:
rmq:
aliases:
- rmqnamesrv
rmqbroker:
image: foxiswho/rocketmq:4.8.0
# image: registry.cn-hangzhou.aliyuncs.com/foxiswho/rocketmq:4.7.0
container_name: rmqbroker
ports:
- 12019:12019
- 12021:12021
volumes:
- ./rmq/logs:/home/rocketmq/logs
- ./rmq/store:/home/rocketmq/store
- ./rmq/brokerconf/broker.conf:/etc/rocketmq/broker.conf
environment:
JAVA_OPT_EXT: "-Duser.home=/home/rocketmq -Xms512M -Xmx512M -Xmn128m"
command: ["sh","mqbroker","-c","/etc/rocketmq/broker.conf","-n","rmqnamesrv:9876","autoCreateTopicEnable=true"]
depends_on:
- rmqnamesrv
networks:
rmq:
aliases:
- rmqbroker
rmqconsole:
image: styletang/rocketmq-console-ng
container_name: rmqconsole
ports:
- 8180:8080
environment:
JAVA_OPTS: "-Drocketmq.namesrv.addr=rmqnamesrv:9876 -Dcom.rocketmq.sendMessageWithVIPChannel=false"
depends_on:
- rmqnamesrv
networks:
rmq:
aliases:
- rmqconsole
networks:
rmq:
name: rmq
driver: bridge
broker.conf
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#所属集群名字
brokerClusterName=DefaultCluster
#broker名字,注意此处不同的配置文件填写的不一样,如果在broker-a.properties使用:broker-a,
#在broker-b.properties使用:broker-b
brokerName=broker-a
#0 表示Master,>0 表示Slave
brokerId=0
#nameServer地址,分号分割
#namesrvAddr=rocketmq-nameserver1:9876;rocketmq-nameserver2:9876
namesrvAddr=rmqnamesrv:9876
#启动IP,如果 docker 报 com.alibaba.rocketmq.remoting.exception.RemotingConnectException: connect to <192.168.0.120:10909> failed
# 解决方式1 加上一句producer.setVipChannelEnabled(false);,解决方式2 brokerIP1 设置宿主机IP,不要使用docker 内部IP
brokerIP1=10.10.13.68
#在发送消息时,自动创建服务器不存在的topic,默认创建的队列数
defaultTopicQueueNums=4
#是否允许 Broker 自动创建Topic,建议线下开启,线上关闭 !!!这里仔细看是false,false,false
#原因下篇博客见~ 哈哈哈哈
autoCreateTopicEnable=true
#是否允许 Broker 自动创建订阅组,建议线下开启,线上关闭
autoCreateSubscriptionGroup=true
#Broker 对外服务的监听端口
listenPort=12021
#删除文件时间点,默认凌晨4点
deleteWhen=04
#文件保留时间,默认48小时
fileReservedTime=120
#commitLog每个文件的大小默认1G
mapedFileSizeCommitLog=1073741824
#ConsumeQueue每个文件默认存30W条,根据业务情况调整
mapedFileSizeConsumeQueue=300000
#destroyMapedFileIntervalForcibly=120000
#redeleteHangedFileInterval=120000
#检测物理文件磁盘空间
diskMaxUsedSpaceRatio=88
#存储路径
#storePathRootDir=/home/ztztdata/rocketmq-all-4.1.0-incubating/store
#commitLog 存储路径
#storePathCommitLog=/home/ztztdata/rocketmq-all-4.1.0-incubating/store/commitlog
#消费队列存储
#storePathConsumeQueue=/home/ztztdata/rocketmq-all-4.1.0-incubating/store/consumequeue
#消息索引存储路径
#storePathIndex=/home/ztztdata/rocketmq-all-4.1.0-incubating/store/index
#checkpoint 文件存储路径
#storeCheckpoint=/home/ztztdata/rocketmq-all-4.1.0-incubating/store/checkpoint
#abort 文件存储路径
#abortFile=/home/ztztdata/rocketmq-all-4.1.0-incubating/store/abort
#限制的消息大小
maxMessageSize=65536
#flushCommitLogLeastPages=4
#flushConsumeQueueLeastPages=2
#flushCommitLogThoroughInterval=10000
#flushConsumeQueueThoroughInterval=60000
#Broker 的角色
#- ASYNC_MASTER 异步复制Master
#- SYNC_MASTER 同步双写Master
#- SLAVE
brokerRole=ASYNC_MASTER
#刷盘方式
#- ASYNC_FLUSH 异步刷盘
#- SYNC_FLUSH 同步刷盘
flushDiskType=ASYNC_FLUSH
#发消息线程池数量
#sendMessageThreadPoolNums=128
#拉消息线程池数量
#pullMessageThreadPoolNums=128
nginx
upstream mq9876 {
server 10.2.0.4:9876 weight=5 max_fails=3 fail_timeout=30s;
}
server {
listen 12006;
proxy_pass mq9876;
proxy_timeout 600s;
proxy_connect_timeout 30s;
}
upstream mq12021 {
server 10.2.0.4:12021 weight=5 max_fails=3 fail_timeout=30s;
}
server {
listen 12021;
proxy_pass mq12021;
proxy_timeout 600s;
proxy_connect_timeout 30s;
}
upstream mq12019 {
server 10.2.0.4:12019 weight=5 max_fails=3 fail_timeout=30s;
}
server {
listen 12019;
proxy_pass mq12019;
proxy_timeout 600s;
proxy_connect_timeout 30s;